µTasker Forum

µTasker Forum => NXPTM M522XX, KINETIS and i.MX RT => Topic started by: tr111 on September 07, 2012, 02:37:52 AM

Title: the mcf52259evb can not run ETHERNET in the uTaskerM522XX_V1.4-11
Post by: tr111 on September 07, 2012, 02:37:52 AM
I use the CW7.2.2 ,and build the uTasker_full.elf.S19 then program to the mcf52259evb board.but the ETHERNET didn't can ping ok,the ftp also fail!
Title: Re: the mcf52259evb can not run ETHERNET in the uTaskerM522XX_V1.4-11
Post by: tr111 on September 07, 2012, 02:53:30 AM
I found WHY!
the J9 and the J10 must set to the FEC_MDC and FEC_MDIO!
THE ETH is OK NOW!