Author Topic: the mcf52259evb can not run ETHERNET in the uTaskerM522XX_V1.4-11  (Read 2032 times)

Offline tr111

  • Jr. Member
  • **
  • Posts: 72
    • View Profile
the mcf52259evb can not run ETHERNET in the uTaskerM522XX_V1.4-11
« on: September 07, 2012, 02:37:52 AM »
I use the CW7.2.2 ,and build the uTasker_full.elf.S19 then program to the mcf52259evb board.but the ETHERNET didn't can ping ok,the ftp also fail!
« Last Edit: September 07, 2012, 02:52:03 AM by tr111 »

Offline tr111

  • Jr. Member
  • **
  • Posts: 72
    • View Profile
Re: the mcf52259evb can not run ETHERNET in the uTaskerM522XX_V1.4-11
« Reply #1 on: September 07, 2012, 02:53:30 AM »
I found WHY!
the J9 and the J10 must set to the FEC_MDC and FEC_MDIO!
THE ETH is OK NOW!