µTasker Forum
µTasker Forum => NXPTM M522XX, KINETIS and i.MX RT => Topic started by: neil on June 04, 2010, 07:09:40 PM
-
Hi Mark,
I want to test the internal a/d converter of the 52259 chip. I have tied vrefH to 2.5v, and want to simply test one channel, is there an example on how to use this on the demo application?
Thanks
Neil
-
Hi Neil
The file ADC_Timers.h includes code to do this. The fact that you are using 2.5V is not relevant apart for the fact that the result is a fraction of this voltage as given by the formula:
(value measured/ ADC_FULL_SCALE)*(VREFH - VREFL) Volts
where full scale is
#define ADC_FULL_SCALE (0xfff << 3)
Regards
Mark