µTasker Forum > STTM STM32 and STR91XF
Compile for STM32F746 fail
LuisHS:
--- Quote from: mark on June 11, 2019, 01:50:54 AM ---Hi
Are you using the open source version on GITHUB or the professional version?
Regards
Mark
--- End quote ---
I do not understand what do you mean, I work with the sources STM32_uTaskerV1.4.9_pre_20.12.2016
Only the uTaskerV1.4 compile, but Im not sure if this is for STM32F746 bootloader by SD
LuisHS:
Now I have open the uTaskerV1.4.3_STM32, and this compile but there is nothing for the F746
mark:
Hi
These versions are quite old and some don't have STM32F7xx support in them.
The latest Open Source version of the project is on GIT HUB:
https://github.com/uTasker/uTasker-Kinetis
and allows developing projects that run on both STM32 and Kinetis parts.
To build the serial loader for STM32F746G_DISCO use the "uTaskerSerialBoot" project and not the "uTaskerV1.4" project, where I have just checked in the STM32F746G_DISCO configuration.
Good luck
Regards
Mark
LuisHS:
Ok, thank you Marc.
Are you planning to add NXP RT1020?
mark:
Hi
Yes, i.MX RT 1020 is in preparation.
To a previous question:
- debug.c is not a file used by either the uTaskerboot nor uTaskerSerialBoot, which means that the projects must be trying to use the wrong files.
- the project uTaskerSerialBoot includes a mode to load from the SD card[/b]
Regards
Mark
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version