Hi
You can try adding the content of the attached zip file "Coldfire_V2_CW10_project.zip" to the root directory of your uTaskerV1.3 project (that is the directory which contains \Applications \uTasker, \Hardware, etc.). This should allow you to import your project into CodeWarrior 10.
Also add the content of the second attached zip file "CodeWarrior_M522XX_CW10.zip" to the folder "\Applications\uTaskerV1.3", or your own application location (it supplies linker scripts and is the location used for output objects).
Then you should change any paths that you find which reference uTaskerV1.4 to uTaskerV1.3 or your own location.
If all works out you will then be able to build the project (make sure the correct processor and linker script is selected in CW10).
The following overview may be helpful:
http://www.utasker.com/forum/index.php?topic=14.msg30#msg30The other possibility is to use the uTaskerV1.4 version and put your application into its \Applications directory. uTaskerV1.4 contains also the CW10 project so you should be able to build yours with it. V1.4 is more or less backward compatible with V1.3. See
http://www.utasker.com/forum/index.php?topic=1310.msg5300#msg5300 for a few details.
I am not aware of any problems with the email addresses but I see that you had also problems sending to my person address, with the error message that "Relay Access was denied" for all. Your company also contacted me at the same address to inform me of this (without problems) which suggests that the difficulty is related to your email account settings.
I think the relay access denial occurs when you use a different output server to send messages from than the one that you account is attached to and some servers may not allow this or the destination will reject it.The uTasker project is now 14 years old and still includes Coldfire V2 support in its project but this tends to be used only rarely for maintenance of legacy projects. After 2011 most Coldfire users switched over to Kinetis parts instead.
Regards
Mark