µTasker Forum
µTasker Forum => NXPTM M522XX, KINETIS and i.MX RT => Topic started by: mark on January 17, 2017, 05:28:48 PM
-
Hi All
KDS3.2 debugging has not been reliable (hardly possible) when SUPPORT_LOW_POWER is defined.
To solve this (rather than disable the low power operation) use the "Check for Updates" command in the KDS Help menu and then allow it to install a newer version of "GNU PEMicro Interface Debugging Support".
After installing this (and optionally other updates) KDS needs to be restarted.
Then debugging works normally again!!
Regards
Mark