µTasker Forum
µTasker Forum => NXPTM LPC2XXX and LPC17XX => Topic started by: mark on September 01, 2012, 08:56:49 PM
-
Hi All
I have experienced a number of LPC2xxx based projects with Ethernet that have a tendency to lose some Ethernet transmissions. Not a huge loss, but at maybe 1/100'000 it is much higher that is usual in a local network.
I have linked to a thread where there are hardware details of a potential improvement/correction in some cases. Probably specific to a certain PHY but it may prove of use to anyone who has similar problems:
http://tech.groups.yahoo.com/group/lpc2000/message/57791
Regards
Mark