µTasker Forum
µTasker Forum => NXPTM LPC2XXX and LPC17XX => Topic started by: mark on January 08, 2008, 11:14:32 PM
-
Hi All
Since the LPC23XX is in fact a super-set of the LPC210X which I have previously used (and still do...) I decided to add executables for them.
If you are interested in these chips check them out on the following page:
http://www.utasker.com/Demos/exes/exes.html
The package included LPC2101, LPC2102, LPC2103 (in LQFP48 and PLCC-44) plus LPC2104, LPC2105 and LPC2106).
Regards
Mark
-
I see message "wpcap.dll is not found" while run *.exe files.
-
Hi
This is so if WinPCap is not installed on the PC. This is used also be Ethereal/WireShark so is often already installed when people are using these programs.
This is also described on the executable page:
"Note that the PC running the simulator should have WinPCap installed (this enables accessing the PC's Ethernet controller and is used also by Ethereal, WireShark etc. If one of these is already installed you already have it). It can be downloaded from www.winpcap.org."
Regards
Mark