1
NXPTM M522XX, KINETIS and i.MX RT / Re: Demo crashes on Towerkit
« on: March 29, 2011, 06:58:46 PM »
Sorry forgot: I don't the TFT board.
raf
raf
News:
Nov 2020: uTasker i.MX RT V1.4.12 is productive - with complete secure loading concept.
Follow uTasker updates at www.twitter.com/uTasker !!
Online Forum registration has now been disabled. Please send an email to an address at the bottom of the home page with your preferred user name and email address if you would like an account.
Return to uTasker main site: www.utasker.com
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
NXPTM M522XX, KINETIS and i.MX RT / Re: Demo crashes on Towerkit
« on: March 29, 2011, 06:58:06 PM »
Hey Mark,
thanks for getting back to me so quickly. Here is my setup:
Compiler: IAR Workbench 6.0
The demo setup is vanilla Beta 1.4.5 plus these options enabled:
SERIAL_INTERFACE
ETH_INTERFACE
USB_INTERFACE
although I did disable the ethernet and usb just to see if it will make a difference and it did not.
I do have one more observation: after flashing the demo, the board is actually on a 30 second reset cycle without me doing anything to it. Just to make sure that I don't have bad hardware, I did flash one of my sample mqx apps and the board is stable.
Which options is it safe to disable in config.h to get a bare-bones system?
Thanks
Raf
thanks for getting back to me so quickly. Here is my setup:
Compiler: IAR Workbench 6.0
The demo setup is vanilla Beta 1.4.5 plus these options enabled:
SERIAL_INTERFACE
ETH_INTERFACE
USB_INTERFACE
although I did disable the ethernet and usb just to see if it will make a difference and it did not.
I do have one more observation: after flashing the demo, the board is actually on a 30 second reset cycle without me doing anything to it. Just to make sure that I don't have bad hardware, I did flash one of my sample mqx apps and the board is stable.
Which options is it safe to disable in config.h to get a bare-bones system?
Thanks
Raf
3
NXPTM M522XX, KINETIS and i.MX RT / Demo crashes on Towerkit
« on: March 29, 2011, 05:11:11 PM »
Hi All,
I was able to flash the Kinetis demo on to my Tower board, however the demo seems highly unstable and keeps rebooting the board. I am able to connect to it through serial on the serial/ethernet board, I can see the the main menu and actually sometimes traverse the menu, but more often than not the app will crash and reboot the board when I try to actually do anything with it. For instance: when I try to change the ip it will crash and reboot when typing set_ip_add without actually getting to issue the command.
Any ideas what might be causing this?
Thanks
Raf
I was able to flash the Kinetis demo on to my Tower board, however the demo seems highly unstable and keeps rebooting the board. I am able to connect to it through serial on the serial/ethernet board, I can see the the main menu and actually sometimes traverse the menu, but more often than not the app will crash and reboot the board when I try to actually do anything with it. For instance: when I try to change the ip it will crash and reboot when typing set_ip_add without actually getting to issue the command.
Any ideas what might be causing this?
Thanks
Raf
Pages: [1]