µTasker Forum
µTasker Forum => µTasker general => Topic started by: mark on August 06, 2012, 10:02:46 AM
-
Hi All
Finally I got around to updating the on-line demo to also show IPv6 operation on a global IPv6 address.
To contact an EVK1105 over IPv4 the address http://demo.utasker.com can be used which resolves to its IPv4 address
To contact it over IPv6 (if you can ;-) its fixed address is http://[2001:470:26:105::99]
Note that the board is also performing 6in4 tunneling for other devices (and my computer) on the LAN so that these can also operate in IPv6 mode via my IPv4-only provider.
Regards
Mark