µTasker Forum

µTasker Forum => NXP^TM M522XX, KINETIS and i.MX RT => Topic started by: mark on April 08, 2014, 09:17:54 PM

Title: Freescale FRDM-K64F
Post by: mark on April 08, 2014, 09:17:54 PM

Hi All

Freescale has just introdued a low cost, high powered Freedom board - the FRDM-K64F:

It costs about $28 at the distributors and offers:


    Freescale K64F Kinetis K64 MCU (MK64FN1M0VLL12)
        High performance ARM® Cortex™-M4 Core
        120MHz, 256KB RAM, 1MB FLASH
        SPI (3)
        I2C (3)
        UART (6)
        USB OTG / Host / Device
        USB
        PWM
        ADC (2x 16bit with mux)
        DAC (2x 12bit)
        Touch Sensor
        GPIO

    FRDM-K64F Onboard Additions
        FXOS8700CQ - 3-axis accelerometer and magnetometer
        Ethernet
        2 push buttons
        RGB LED


http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=FRDM-K64F&fsrch=1

This is what Freescale calls a next generation Kinetis.

It certainly packs in functionality with a good price tag!

Regards

Mark

Title: Re: Freescale FRDM-K64F
Post by: mark on April 09, 2014, 02:19:58 PM

Hi All

Please note that a simulator configuration has been prepared for this board - see https://community.freescale.com/thread/322132

By the way, two new features of the simulation shown are:
- When hovering the mouse over connectors or switches on the board (which are connected to processor ports) the port connection details are blended in
- The RGB LED is simulated as a mixed colour LED controlled by three output ports - depending on the state of the outputs the LED colour mixture is determined.

Regards

Mark