µTasker Forum

µTasker Forum => NXPTM M522XX, KINETIS and i.MX RT => Topic started by: evgenik on July 13, 2008, 12:31:04 PM

Title: Working state of Web Server
Post by: evgenik on July 13, 2008, 12:31:04 PM
Hi Mark.

During work above the project I checked work of a server sending command 'ping' with the address of my server. But now, checking work of a server and trying for the first time to load pages html ,  FTP server does not give connection and ping for the first time always answers, but then answers "Reply..." randomally or all time "Request timed out".
I configured FTP by you example in 'uTasker-FTP' section of tutorial for Coldfire. Have any idea?

Thanks.
Evgeni.
Title: Re: Working state of Web Server
Post by: mark on July 14, 2008, 01:45:45 PM
Hi Evgeni

From the problem description I don't have any concrete tips. It sounds as though there is a connection problem but I can't say from where it is coming from (hardware connection, server or client). I would however check the network configuration to ensure that there is not an IP conflict somewhere since this can cause strange effects.

Regards

Mark