µTasker Forum

µTasker Forum => NXP^TM M522XX, KINETIS and i.MX RT => Topic started by: chronosdino on September 08, 2008, 03:43:04 PM

Title: flash_config.s
Post by: chronosdino on September 08, 2008, 03:43:04 PM

this file is not present.

I need to compile the utasker for the M52233DEMO board.

Is there a project for CW 6.3 which compile without modification ?

I need to omplante an web site on it, and i doesn't want that my file name was changed.


Thanks !!

Title: Re: flash_config.s
Post by: mark on September 08, 2008, 08:45:38 PM

Hi

The file flash_config.s is in \Hardware\M5223X

Make sure that you have installed the project correctly. Starting with the base software, add the latest service pack and then you should have up-to-date code. Have you perhaps started with only SP7 (without the base project?).

The project will build with CW6.3 without modifying anything.

regards

Mark

Title: Re: flash_config.s
Post by: chronosdino on September 12, 2008, 12:46:30 PM

Thank you for responding !

I effectively have forgot the base project code.