µTasker Forum

µTasker Forum => µTasker general => Topic started by: jreyes085 on October 29, 2008, 10:18:06 PM

Title: DEMOQE128 Evaluation Board - I/O Ports
Post by: jreyes085 on October 29, 2008, 10:18:06 PM

Hi, The evaluation board has a female port under it, it has 56 pins from the 64 that the MCF51QE128 has. I use the header called "MCF51QE128.H". Do i have to make some changes to code to disable methods and variables for all the tests examples?

Ok, thanks!

Title: Re: DEMOQE128 Evaluation Board - I/O Ports
Post by: mark on October 29, 2008, 10:49:30 PM

Hi

The MCF51QE128 is a Coldfire V1 core and, I believe, peripherals compatible with 16-bit devices.

The V1 core devices are not supported in the uTasker project - only the single-chip V2 as in the following list:
http://www.utasker.com/forum/index.php?topic=256.0

Regards

Mark