µTasker Forum

µTasker Forum => µTasker general => Topic started by: aleksandar on June 09, 2010, 02:31:37 PM

Title: Free 6LowPan stack on CC2530?
Post by: aleksandar on June 09, 2010, 02:31:37 PM

HI,

I am a fourth year student of Electrical Engineering and currently doing my BSc work with the task to implement a 6lowpan stack on TI cc2530.

Whether we can help with the selection of a stack, advice about stack and implementation, or refer me to where I could find information that would have been useful for me?

Thank in advance,

Aleksandar

Title: Re: Free 6LowPan stack on CC2530?
Post by: mark on June 09, 2010, 09:24:41 PM

Hi Aleksandar

Take a look at http://www.utasker.com/forum/index.php?topic=615.msg2667#msg2667
ATMEL has realised something on the SAM7X but I have no info about equivalents on the CC2530.

Regards

Mark

Title: Re: Free 6LowPan stack on CC2530?
Post by: mhoneywill on June 09, 2010, 10:50:17 PM

Hi Aleksandar,

The CC2530 is an 8051 derivative chip and there is currently no uTasker port for this chip family, and a port is something that would need a fair bit of work.

If you are not tied to this chip you could always look at the jennic chips http://www.jennic.com/ a number of application notes and a 16 bit chip with a free Eclipse based compiler. Still no uTasker port but lots of source on the Jennic site

Cheers

Martin