µTasker Forum
µTasker Forum => NXPTM LPC2XXX and LPC17XX => Topic started by: Manish on October 02, 2009, 09:57:18 AM
-
Dear mark,
I want to implement USB device in LPC2378 hardware, but when I have enable USB_INTERFACE macro then it gives error USB_HW. and It cant enable to anywhere so can help me on this ?
Thank you
Manish Dabhi
-
Hi Manish
USB device is supported presently in the M522XX and SAM7X projects only.
To use USB on the NXP devices you will need to use SW supplied by NXP.
Regards
Mark