1
NXPTM LPC2XXX and LPC17XX / Problem with KS8721BL PHY in Keil uVision 4
« on: June 27, 2011, 09:48:24 PM »
Hi friends
I have designed a training board for LPC2368 and use KS8721BL as PHY.
When I test my board with uTaskerV1.3_Olimex_LPC2378-STK.hex (original Hex file), it works well and I can PING the board easily and use http or ftp services ! but when I build uTaskerV1.4_LPC-5 in Keil uVision4, it does not work ! (I can not PING the board)
This is what I have done:
1- Download uTaskerV1.4_LPC-5
2- extract it
3- open uTaskerV1.4_LPC-5_2\Applications\uTaskerV1.4\uVision4_LPC2xxx\uTaskerV1.4.uvproj
4- select LPC2368FBD100 in config.h
5- select Olimex board in config.h
6- build project
7- write Hex file on flash
Should I do anything else...?
What's the PROBLEM ?
Thank you for your attention
I have designed a training board for LPC2368 and use KS8721BL as PHY.
When I test my board with uTaskerV1.3_Olimex_LPC2378-STK.hex (original Hex file), it works well and I can PING the board easily and use http or ftp services ! but when I build uTaskerV1.4_LPC-5 in Keil uVision4, it does not work ! (I can not PING the board)
This is what I have done:
1- Download uTaskerV1.4_LPC-5
2- extract it
3- open uTaskerV1.4_LPC-5_2\Applications\uTaskerV1.4\uVision4_LPC2xxx\uTaskerV1.4.uvproj
4- select LPC2368FBD100 in config.h
5- select Olimex board in config.h
6- build project
7- write Hex file on flash
Should I do anything else...?
What's the PROBLEM ?
Thank you for your attention