1
NXPTM M522XX, KINETIS and i.MX RT / Re: KDS build for FRDM-KL25Z - uTasker Serial Boot
« on: March 19, 2017, 05:42:23 PM »
Good video! Thank you Mark!
News:
Nov 2020: uTasker i.MX RT V1.4.12 is productive - with complete secure loading concept.
Follow uTasker updates at www.twitter.com/uTasker !!
Online Forum registration has now been disabled. Please send an email to an address at the bottom of the home page with your preferred user name and email address if you would like an account.
Return to uTasker main site: www.utasker.com
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
NXPTM M522XX, KINETIS and i.MX RT / Re: KDS build for FRDM-KL25Z - uTasker Serial Boot
« on: March 09, 2017, 10:55:46 AM »
Hi Mark,
Thanks for the message. There is no issue at the moment. Everything looks good. I'm making my way through the serial loader document at the moment.
So I was editing the config.h file in the uTaskerv1.4 rather than the one in uTaskerSerialBoot. The reason, as you said, was the files greyed out folders in Eclipse are not correct. Once I came to realize that I made the correct change and everything started working. 
Thanks for the message. There is no issue at the moment. Everything looks good. I'm making my way through the serial loader document at the moment.
Quote
step 5 is not absolutely necessary because it builds the correct target - just the files that are shown greyed by Eclipse are not correctI just spent quite a lot of time figuring out why the assembler was giving out an error at compile time. Eventually I came to realize that I was editing the wrong "config.h" file.
So I was editing the config.h file in the uTaskerv1.4 rather than the one in uTaskerSerialBoot. The reason, as you said, was the files greyed out folders in Eclipse are not correct. Once I came to realize that I made the correct change and everything started working.
3
NXPTM M522XX, KINETIS and i.MX RT / KDS build for FRDM-KL25Z - uTasker Serial Boot
« on: March 08, 2017, 08:12:32 PM »
Hi there,
I had some troubles getting the uTaskerSerialBoot to run on my FRDM-KL25Z. This is my first project with uTasker I would like to share the steps I've done so far:
1. Downloaded and installed KDS version 3.2
2. Downloaded and Unzip uTaskerKinetisV1.4.11
3. Followed the steps for KDS found here: http://www.utasker.com/kinetis/compilers.html#KDS in getting the right project files.
- delete .settings folder and all .* files and copy the .settings and all .* files from \Applications\uTaskerV1.4\KinetisDesignStudio\Project_Settings
4. Import project into KDS
5. Change the Project settings for displaying the active files belonging to the project. Instructions found here: http://www.utasker.com/forum/index.php?topic=1887.0 . This is very important step and missing from documentation. Also being new to Eclipse development type environment I was not aware of it.
6. In config.h I un-commented FRDM_KL25Z and commented FRDM_K64F.
7. Select cortex-m0plus is selected in Project Properties->Target Processor -> ARM family
8. Linker modified to: "${uTaskerLinkerScripts}/KL_128_16.ld"
9. Project Properties -> C/C++ Build -> Settings -> Build Steps tab
add a quotation mark ( " ) character at the end of the command path
=> it will generate the .bin/.srec/.hex files
10. Triggered Built with option : uTaskerSerialLoader_FLASH
At the moment the on-board 3 colour LED is flashing GREEN and there is a serial communication via the Virtual COM port.
Many thanks for your time!
Radu
I had some troubles getting the uTaskerSerialBoot to run on my FRDM-KL25Z. This is my first project with uTasker I would like to share the steps I've done so far:
1. Downloaded and installed KDS version 3.2
2. Downloaded and Unzip uTaskerKinetisV1.4.11
3. Followed the steps for KDS found here: http://www.utasker.com/kinetis/compilers.html#KDS in getting the right project files.
- delete .settings folder and all .* files and copy the .settings and all .* files from \Applications\uTaskerV1.4\KinetisDesignStudio\Project_Settings
4. Import project into KDS
5. Change the Project settings for displaying the active files belonging to the project. Instructions found here: http://www.utasker.com/forum/index.php?topic=1887.0 . This is very important step and missing from documentation. Also being new to Eclipse development type environment I was not aware of it.
6. In config.h I un-commented FRDM_KL25Z and commented FRDM_K64F.
7. Select cortex-m0plus is selected in Project Properties->Target Processor -> ARM family
8. Linker modified to: "${uTaskerLinkerScripts}/KL_128_16.ld"
9. Project Properties -> C/C++ Build -> Settings -> Build Steps tab
add a quotation mark ( " ) character at the end of the command path
=> it will generate the .bin/.srec/.hex files
10. Triggered Built with option : uTaskerSerialLoader_FLASH
At the moment the on-board 3 colour LED is flashing GREEN and there is a serial communication via the Virtual COM port.
Many thanks for your time!
Radu
Pages: [1]