Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - abhimanyum

Pages: [1] 2
1
µTasker general / uTasker Basic
« on: September 13, 2011, 10:17:12 AM »
Hi Mark,

If you can please tell some facts about uTasker.
Like how many APIs does it have and the type of Kernel uTasker is using.

On wikipedia, it says Scheduler is the type of kernel uTasker, I'm not clear on what is a Scheduler kernel.

Thanks & Regards,
Ab

2
STTM STM32 and STR91XF / Re: Build Error
« on: September 06, 2011, 01:18:38 PM »
Hi Mark,

After using your uTasker1.4 LD file I was able to compile, link all files and finally got the ELF File.
I'm using  OpenOCD for flashing my comstick, but when I issue run command to it, nothing actually is happening, though Open OCD saying the comstick is running, but I'm not able to get the data as I'm reading it through GPIO ports.

The Taskconfig is as follows (if required):

#ifdef FN_INTRO_TASK
{ "1",   fnIntroTask,   NO_QUE,   10,   10,   UTASKER_STOP},
#endif

Thanks,
Ab

3
STTM STM32 and STR91XF / Re: Build Error
« on: September 02, 2011, 11:50:19 PM »
Hi Mark,

I'm afraid I was unable to find crt0_gcc.s 1.3 version, is it in 1.4?


Thanks & Regards,
Ab

4
STTM STM32 and STR91XF / Re: Build Error
« on: September 02, 2011, 08:00:32 PM »
Hi Mark,

I was able to create STR91XF.o object file.
When I'm trying to create the ELF file with following command

Code: [Select]
C:\Program Files\CodeSourcery\Sourcery G++ Lite\bin>arm-none-eabi-gcc -march=arm
v5te -mlittle-endian -mthumb -mthumb-interwork -Wstrict-prototypes -IC:\RTOS\uTa
skerRTOS\Applications\uTaskerV1.3 -D _GNU  -D _STR91XF -g -Os -Wl,-Map=C:\RTOS\u
TaskerRTOS\Applications\uTaskerV1.3\GNU_STR91XF\uTaskerV1.3.map --no-gc-sections
 -nostartfiles -TC:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\GNU_STR91XF\uTaske
rV1.3.ld -o uTaskerV1.3.elf C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\a
.o C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\application.o C:\RTOS\uTas
kerRTOS\Applications\uTaskerV1.3\Build\arp.o C:\RTOS\uTaskerRTOS\Applications\uT
askerV1.3\Build\debug.o  C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\dhcp
.o C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\dns.o  C:\RTOS\uTaskerRTOS
\Applications\uTaskerV1.3\Build\Driver.o C:\RTOS\uTaskerRTOS\Applications\uTaske
rV1.3\Build\eth_drv.o  C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\Ethern
et.o C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\ftp.o  C:\RTOS\uTaskerRT
OS\Applications\uTaskerV1.3\Build\GlobalTimer.o C:\RTOS\uTaskerRTOS\Applications
\uTaskerV1.3\Build\http.o  C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\ic
mp.o C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\ip.o  C:\RTOS\uTaskerRTO
S\Applications\uTaskerV1.3\Build\ip_utils.o C:\RTOS\uTaskerRTOS\Applications\uTa
skerV1.3\Build\KeyScan.o  C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\LCD
.o C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\NetworkIndicator.o  C:\RTO
S\uTaskerRTOS\Applications\uTaskerV1.3\Build\pop3.o C:\RTOS\uTaskerRTOS\Applicat
ions\uTaskerV1.3\Build\smtp.o C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build
\tcp.o  C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\telnet.o C:\RTOS\uTas
kerRTOS\Applications\uTaskerV1.3\Build\tftp.o  C:\RTOS\uTaskerRTOS\Applications\
uTaskerV1.3\Build\Tty_drv.o C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\u
dp.o  C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\uFile.o C:\RTOS\uTasker
RTOS\Applications\uTaskerV1.3\Build\uMalloc.o  C:\RTOS\uTaskerRTOS\Applications\
uTaskerV1.3\Build\uTasker.o C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\w
atchdog.o  C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\webInterface.o C:\
RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\webutils.o C:\RTOS\uTaskerRTOS\A
pplications\uTaskerV1.3\Build\crt0_STR91x.o C:\RTOS\uTaskerRTOS\Applications\uTa
skerV1.3\Build\STR91XF.o


I'm getting following error:

Code: [Select]
C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\crt0_STR91x.o: In function `_
_str_enable_interrupt':
C:\RTOS\uTaskerRTOS\Hardware\STR91XF/crt0_STR91x.s:401: undefined reference to `
VIC0_BASE'
C:\RTOS\uTaskerRTOS\Hardware\STR91XF/crt0_STR91x.s:401: undefined reference to `
VIC1_BASE'
C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\STR91XF.o:(.rodata+0xa0): und
efined reference to `fnPPP'
collect2: ld returned 1 exit status


Thanks & Regards,
Ab

5
STTM STM32 and STR91XF / Re: Build Error
« on: September 02, 2011, 06:46:50 PM »
Thanks Mark

6
STTM STM32 and STR91XF / Build Error
« on: September 02, 2011, 04:13:21 PM »
Hi Mark,

When I'm using GNU Tool for making object files, I'm getting following error, if you can please help me with that.

Command:
Code: [Select]
C:\Program Files\CodeSourcery\Sourcery G++ Lite\bin>arm-none-eabi-gcc -march=arm
v5te -Wall -Wstrict-prototypes -I C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3 -
D _GNU -D _STR91XF -g -c -Os C:\RTOS\uTaskerRTOS\Hardware\STR91XF\STR91XF.c -o C
:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\Build\STR91XF.o

Error:
Code: [Select]
In file included from C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3/config.h:433:
0,
                 from C:\RTOS\uTaskerRTOS\Hardware\STR91XF\STR91XF.c:34:
C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3/TaskConfig.h:90:1: warning: functio
n declaration isn't a prototype
C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3/TaskConfig.h:91:1: warning: functio
n declaration isn't a prototype
C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3/TaskConfig.h:92:1: warning: functio
n declaration isn't a prototype
C:\DOCUME~1\ABHIMA~1\LOCALS~1\Temp\ccXDoOmn.s: Assembler messages:
C:\DOCUME~1\ABHIMA~1\LOCALS~1\Temp\ccXDoOmn.s:612: Error: undefined symbol DISAB
LE_ARM_INTS used as an immediate value
C:\DOCUME~1\ABHIMA~1\LOCALS~1\Temp\ccXDoOmn.s:647: Error: undefined symbol ENABL
E_ARM_INTS used as an immediate value

Thanks & Regards,
Ab

7
µTasker general / Re: Telnet Connection
« on: August 29, 2011, 08:06:30 PM »
Hi Mark,

I'm not quite sure how can I use TX_FREE and above code snipnet to free the Buffer. If you can please help me understand how to use it.


Thanks,
Ab

8
µTasker general / Telnet Connection
« on: August 29, 2011, 06:41:41 PM »
Hi Mark,

I'm running a long loop, which actually prints the the loop variable. Using Telnet connection as my Output Screen the telnet stops displaying anything after a while when loop reaches somewhere at 548 (Starting at 0), but I'm able to interact with telnet GUI Commands.


Thanks,
Ab

9
STTM STM32 and STR91XF / File Write STR9ComStick
« on: August 29, 2011, 05:42:12 PM »
Hi Mark,

Is it possible to write File on STR9Comstick using uTasker?

Thanks,
Ab

10
STTM STM32 and STR91XF / Re: Download Code to STR9Comstick
« on: August 28, 2011, 09:54:27 PM »
Thanks Mark very much.

Regards,
Ab

11
STTM STM32 and STR91XF / Re: Download Code to STR9Comstick
« on: August 28, 2011, 03:56:23 PM »
Hi Mark,

Since STR9Comstick, requires single ELF File, so how can create single ELF File from multiple uTasker C Files.


Thanks,
Ab

12
STTM STM32 and STR91XF / Re: STR9Comstick IAR
« on: August 28, 2011, 03:52:06 PM »
Thanks

13
µTasker general / Re: uTasker API
« on: August 28, 2011, 01:01:49 PM »
Mark,

I think uTaskerSystemTick, will help me.

Thanks,
Ab

14
STTM STM32 and STR91XF / STR9Comstick IAR
« on: August 27, 2011, 09:03:24 PM »
Hi There,

I've been running IAR Workspace (provided one) and getting these errors, if any one can help me.

Code: [Select]
Building configuration: uTaskerV1.3 - Bank 0 full
Updating build tree...
91x_init.s
Error[109]: Expression is too complex C:\RTOS\uTaskerRTOS\Hardware\STR91XF\91x_init.s 186
Error[109]: Expression is too complex C:\RTOS\uTaskerRTOS\Hardware\STR91XF\91x_init.s 186
Error[109]: Expression is too complex C:\RTOS\uTaskerRTOS\Hardware\STR91XF\91x_init.s 186
Error[109]: Expression is too complex C:\RTOS\uTaskerRTOS\Hardware\STR91XF\91x_init.s 186
Error[109]: Expression is too complex C:\RTOS\uTaskerRTOS\Hardware\STR91XF\91x_init.s 186
Error[109]: Expression is too complex C:\RTOS\uTaskerRTOS\Hardware\STR91XF\91x_init.s 186
Error while running Assembler
91x_vect.s
Error[40]: Bad instruction C:\RTOS\uTaskerRTOS\Hardware\STR91XF\91x_vect.s 23
Error while running Assembler
Driver.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
Ethernet.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
GlobalTimer.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
KeyScan.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
LCD.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
NetworkIndicator.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
STR91XF.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
Tty_drv.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
Watchdog.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
a.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
application.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
arp.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
debug.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
dhcp.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
dns.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
eth_drv.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
ftp.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
http.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
icmp.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
ip.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
ip_utils.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
low_power.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
ppp.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
smtp.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
snmp.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
tcp.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
telnet.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
uFile.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
uMalloc.C 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
uTasker.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
udp.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
webInterface.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
webutils.c 
Fatal Error[Pe1696]: cannot open source file "intrinsic.h" C:\RTOS\uTaskerRTOS\hardware\STR91XF\STR91XF.h 24
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\.\"
            searched: "C:\RTOS\uTaskerRTOS\Applications\uTaskerV1.3\IAR_STR91XF\..\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\"
            searched: "C:\Program Files\IAR Systems\Embedded Workbench 6.0 Kickstart\arm\inc\c\"
Error while running C/C++ Compiler
 
Total number of errors: 40
Total number of warnings: 0



Thanks in Advance

15
µTasker general / Re: uTasker API
« on: August 26, 2011, 10:30:29 PM »
Thanks a lot Mark for your support. I do really appreciate that.

Just a sheer curiousity, is there any way to geth the ComStick Hardware Timer Ticks or read ComStick Timer.
If something like this is possible.


Cheers,
Ab

Pages: [1] 2