Author Topic: glcd 240*128  (Read 13687 times)

Offline fatane

  • Newbie
  • *
  • Posts: 2
    • View Profile
glcd 240*128
« on: February 21, 2011, 08:47:53 AM »
Hi every body. please help me!! :'( i need c code to drive glcd240*128. i do'nt know i start

Offline mhoneywill

  • Full Member
  • ***
  • Posts: 173
    • View Profile
Re: glcd 240*128
« Reply #1 on: February 21, 2011, 12:08:56 PM »
The first question is What is your Display module and what Chip does it use? There are many different modules and interface chips.

Offline fatane

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: glcd 240*128
« Reply #2 on: March 08, 2011, 10:46:22 AM »
hi
my IC is atmega128 and i work in codevision.
thanks

Offline mhoneywill

  • Full Member
  • ***
  • Posts: 173
    • View Profile
Re: glcd 240*128
« Reply #3 on: March 08, 2011, 11:56:05 PM »
I'm sorry but uTasker does not support the ATmega range of processors.
Codevision is the compiler you use, that does note really make any different you are just looking for C source code to drive your display.

You also did not say which display you were using and which chip was used in the display, this is the important thing. There are many different types of display driver chips, all need slightly different software code to set them up and drive them.

But as I said before uTasker does not support the ATMega

Regards

Martin