Author Topic: KDS not correctly displaying files belonging to the active target  (Read 8996 times)

Offline mark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3238
    • View Profile
    • uTasker
Hi All

If any KDS users are finding that builds work OK for the selected target but the excluded files are not displayed correctly, please see this thread:
There is a setting that can be adjusted with allows it to work as expected!



1. Open the main project properties and then expand C/C++ General, followed by Indexer
2. Enabled "Enable project specific settings"
3. Change the radio button from "Used a fixed build configuration" to "Use active build configuration"