Author Topic: IAR ColdFire support  (Read 13807 times)

Offline jezc

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
IAR ColdFire support
« on: March 28, 2011, 12:45:12 PM »
Hi Mark,

A while ago, you mentioned that you were considering looking into adding IAR support for the ColdFire projects - have you got any further with this?

I'm getting close to the point where I'll have to choose whether to tackle a new project in CodeWarrior 10.1 or IAR.

Initially I'm likely to have to do some work on the ColdFire project but we do have a longer-term interest in migrating this to Kinetis, so I could use either tool-chain (we curently use IAR for ColdFire & ARM targets) but am still not very comfortable with Eclipse.

Just after an update if possible.

Cheers,
    Jez

Offline mark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3243
    • View Profile
    • uTasker
Re: IAR ColdFire support
« Reply #1 on: March 28, 2011, 05:14:36 PM »
Jez

There is a new Coldfire IAR project in the version 1.4.4. See http://www.utasker.com/forum/index.php?topic=1310.0

Regards

Mark

Offline jezc

  • Jr. Member
  • **
  • Posts: 62
    • View Profile
Re: IAR ColdFire support
« Reply #2 on: March 28, 2011, 08:04:19 PM »
Thanks Mark - must have skipped that one by mistake...

I'll get it & give it a go.

Sorry to have troubled you

Cheers,
    Jez