µTasker Forum > NXP^TM M522XX, KINETIS and i.MX RT

KDS not correctly displaying files belonging to the active target

(1/1)

mark:
Hi All

If any KDS users are finding that builds work OK for the selected target but the excluded files are not displayed correctly, please see this thread:
https://community.freescale.com/message/511276#511276
There is a setting that can be adjusted with allows it to work as expected!

Regards

Mark

Summary:
1. Open the main project properties and then expand C/C++ General, followed by Indexer
2. Enabled "Enable project specific settings"
3. Change the radio button from "Used a fixed build configuration" to "Use active build configuration"
Done.

Navigation

[0] Message Index