Author Topic: Pictrure Frame application on IDM-L35 kit  (Read 15430 times)

Offline mark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3240
    • View Profile
    • uTasker
Pictrure Frame application on IDM-L35 kit
« on: July 08, 2010, 04:18:37 PM »
Hi

I have just added a new demo for the IDM-L35 kit (http://www.luminarymicro.com/products/mdl-idm-l35.html) on the SW/Live demo page. http://www.utasker.com/SW_Demos.html#LM3SXXXX.

This will run a dot based TFT demo if no valid SD card (FAT32 formatted) is inserted in the slot. If a valid card is found it will display a blue screen. If the SD card has a directory called "pics" all BMPs found in that directory (these should be 320 x 240 in non-compressed 24bit color format) will be displayed on the TFT in form of a slide show.

When the SD card is not inserted and the dot-based demo is running it is possible to draw on the display with a pen-type input device (touch screen).

Regards

Mark

Offline mark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3240
    • View Profile
    • uTasker
Re: Pictrure Frame application on IDM-L35 kit
« Reply #1 on: July 15, 2010, 01:59:53 AM »
Hi All

I added a video for this module in operation at: http://www.youtube.com/watch?v=GkVOn4Nf2dk

In fact I forgot to include the touch screen showing drawing functions... maybe I'll add it later.

Regards

Mark

Offline mark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3240
    • View Profile
    • uTasker
Re: Pictrure Frame application on IDM-L35 kit
« Reply #2 on: August 10, 2010, 10:45:47 PM »
Hi All

The following video shows the touch screen in operation as well as a second monochrome graphical emulation mode:

http://www.youtube.com/watch?v=PvsFFRigwFU

Regards

Mark