Author Topic: uTasker V1.4 available for LM3SXXXX  (Read 15225 times)

Offline mark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3240
    • View Profile
    • uTasker
uTasker V1.4 available for LM3SXXXX
« on: August 03, 2009, 12:40:14 AM »
Hi Luminary users

I would like to inform you that there is a new uTasker version V1.4 available for the Luminary Micro devices including first support for the Tempest Class (9000 series) parts and USB .

This version includes latest new features:
-   User files - http://www.utasker.com/docs/uTasker/uTaskerUserFiles.PDF
-   Graphical LCD - http://www.utasker.com/forum/index.php?topic=636.0
-   SREC-Serial Loader project - http://www.utasker.com/docs/uTasker/uTaskerSerialLoader.PDF
as well as many improvements which can be read in the file headers if necessary.
                                                                       
One of the reasons for creating a version V1.4 is due to slightly different formatted string routines, which is described here: http://www.utasker.com/forum/index.php?topic=641.0 but also due to the fact that V1.4 is a larger synchronization of all uTasker target projects to a compatible state, with new port macros (aiding GPIO access and also easing moving between targets: see LM3SXXXX.h and search for “port macros” to see the macro set). All file headers have also be modified to reflect a new office address, whereby also newest sources have been integrated, improving code layout (more consistent) and correcting as many comment typos as have been found during the last year or so.
Specifically the file application.c was getting rather large and difficult to work with so a number of demos originally integrated into this file have been included via header files (such as application_lcd.h or Port_Interrupts.h). This makes application.c much smaller and easier to review but also keeps all peripheral tests, which have simply been removed to specific headers (containing code); it may appear a little strange at first but it does in fact work well like that after a small amount of practice.

The uTaskerV1.4 package also introduces a MODBUS extension pack which is compatible with this version (can be dropped in to work with (almost) all supported processors) – see http://www.utasker.com/forum/index.php?topic=635.0 and http://www.utasker.com/forum/index.php?topic=580.0 for more details and to review its user’s guide.

All registered users will receive an email containing the link to the new package as well as a new LM3SXXXX password for the V1.4 project.

The uTasker LM3SXXXX tutorials has been revised for the V1.4 release: http://www.utasker.com/docs/LM3Sxxxx/uTaskerV1.4_LM3SXXXX.PDF
I hope that you find the new software of interest and use – just use the forum in case of problems, questions or and other comments.


Good luck

Regards

Mark

Offline mark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3240
    • View Profile
    • uTasker
Re: uTasker V1.4 available for LM3SXXXX
« Reply #1 on: September 29, 2009, 09:09:10 PM »
Hi All

The following is the patch list for V1.4. Check whether these are solved in the version that you downloaded, else correct when needed:

1) Random number generator error can be corrected as pointed out by Dave here: http://www.utasker.com/forum/index.php?topic=702.msg3049#msg3049

Regards

Mark