Hi
The best solution is to create a target for use when building for this configuration. In the explorer window on the left hand side of the CodeWarrior window, click on targets to see the ones presently available. Then, in the project menu select “create target” [the focus must be in the target window for the menu to appear]. Chose "clone existing target" and chose the one that is closest and it will make a copy of it. Then you can select this new target for use.
Back in the files view you can add your .lcf file. Click on the “linker command files” directory; right click mouse and “add files” - it will ask you which targets it is to be added to - so select only your new target.
You will now have several .lcf files in the “linker command files” directory. Two of these will have a black dot next to them in the target column – the one that was originally used and your new one. To remove the original one, double click on the dot next to it so that it disappears. This will leave just your own new one, which will then be used as linker script file when building this target. Other targets still exist unmodified so can be build as previously when required.
Regards
Mark