Author Topic: Were to obtain Ethernet MAC addresses from?  (Read 8477 times)

Offline phomann

  • Newbie
  • *
  • Posts: 47
    • View Profile
    • Homann Designs
Were to obtain Ethernet MAC addresses from?
« on: January 27, 2009, 07:16:29 AM »
Hi all,

Has anyone had experience with the Microchip MAC Address chips. I'm considering it as a possibility as I'm not sure of the cost of purchasing a block of MAC addresses.

The MicroChip component 24AA02E48 also has a 256 byte flash and an i2C interface. Has anyone used them with, or integrated them into uTasker?


Otherwise, what do others do for obtaining MAC addresses?

Cheers,


Peter.

Offline mark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3236
    • View Profile
    • uTasker
Re: Were to obtain Ethernet MAC addresses from?
« Reply #1 on: January 27, 2009, 10:45:31 AM »
Hi Peter

See the following: http://www.utasker.com/forum/index.php?topic=21.msg68#msg68

Basically 4000 MAC addresses work out at about 13 Cents each.
Larger amounts (assuming larger quantities used) much cheaper per MAC address

For only small quantities, a minimum of 4000 addresses still needs to be purchased and so the used address cost may rise. The break-even between the $500 and a MAC address chip per board depends on the chip price and quantity.

Regards

Mark
« Last Edit: January 28, 2009, 09:47:31 AM by mark »

Offline phomann

  • Newbie
  • *
  • Posts: 47
    • View Profile
    • Homann Designs
Re: Were to obtain Ethernet MAC addresses from?
« Reply #2 on: January 28, 2009, 01:15:00 AM »
Hi Mark,

Thanks for the reply. It looks like purchasing a block of 4000 may be the way to go.

Cheers,


Peter.