Author Topic: in the mcf52259evb uploading the file H_Upload.bin can not run at M522XX_V1.4-11  (Read 2142 times)

Offline tr111

  • Jr. Member
  • **
  • Posts: 72
    • View Profile
when I use the mcf52235evb the H_Upload.bin  use the FTP upload to the mcf52235evb is ok can earse the flash at 0x800 and run new use code!
but I use the mcf52259evb the H_Upload.bin  use the FTP upload to the mcf52259evb ,that can not earse
the flash and updating the code.after reboot  in the ftp server the H.bin is also at the ftp server.
when I use the HTTP upload,it can can earse the flash at 0x1000 and write the H.bin to the falsh,but I code is at 0x800 to updating,so I must change code to 0x1000 that is ok to run .
I undef the
//#define SPI_SW_UPLOAD                                                // SW upload to SPI FLASH support enabled